Features

Overview: The Ring Alarm Motion Detector (2nd generation) keeps an eye on
your home while you\’re away. Whenever motion is detected inside your home, you
get an alert on your mobile device through the Ring App. The Motion Detector
wirelessly connects to the Base Station via Z-Wave, which has a 250\’ range. Add
Motion Detectors to every room to blanket your home with protection from
intruders. The Motion Detector works only with the
Ring
Alarm Security System.

Mounting: The detector mounts to virtually any flat wall or
corner in your home. The included mounting bracket attaches
to a flat wall or in room corners using strong 2-sided tape. For best results, the motion detector should be mounted approximately 7.5 feet above the floor. There should be at least 0.5 inches of clearance from the ceiling. It should not be aimed toward heat sources, such as fireplaces or sunny windows to prevent false alarms.

Motion Sensitivity: The Ring Alarm motion detector uses
Passive Infrared Sensors (PIR) to scan the room. When a warm body passes through
the detector\’s field of view, the change in the heat triggers an alert. The "pet
friendly" sensors used in the Ring Motion Detector are calibrated to ignore heat
sources from animals 33 pounds and under (under the default setting), resulting
in fewer false alerts. You can adjust the sensitivity control in the Device
Profile menu of the Ring app or web portal to fine tune the Motion Detector to
your household.

Power Requirements: The Motion Detector is powered by two user-replaceable alkaline batteries (included).