Features

Overview: The Sennheiser RS 5200 Digital Wireless TV
headphones enhance your TV watching experience by providing clear, intelligible
audio of your favorite programs. The RS 5200 includes a docking station/transmitter (TR
5200), stethoscope-styled receiver and earphones (RR 5200), digital and analog connecting cables,
and 4 pairs of ear pads.

RR 5200: With a range of up to 230 feet (70 meters), the RR 5200
wireless "stethoset" receiver allows you to move around freely while you watch
TV. The headset receiver automatically turns on/off when you put it on and take
it off. It has a built-in Lithium-Polymer rechargeable battery (3.7V, 350mAh)
with a typical operating time of up to 12 hours. The RR 5200 features
replaceable silicone rubber ear pads, available in two sizes, plus two pairs of foam ear pads.
The "stethoset" receiver has an on-board volume control and Speech
Intelligibility button.

TR 5200: The TR 5200 docking station and transmitter charges
the RR 5200 headset in approximately 3 hours. You can connect an audio source,
such as your TV or home stereo, using the supplied optical digital (Toslink) or
analog cables (3.5mm/stereo RCA adapter). The included AC adapter has four interchangeable power
plug adapters (North America, Europe, Great Britain, and Australia), allowing
you to use the RS 5200 system most anywhere in the world. The TR 5200 lets you
check the charging status of a docked receiver, as well as the remaining charge
of a paired receiver when it is turned on.

Settings: The RS 5200 offers several settings for tailoring
your listening experience to your individual tastes or needs:

• Hearing Profiles: The hearing profiles change the sound
  of the audio signal to improve speech intelligibility by using compression,
  and boosting/attenuating certain frequencies. Using the keypad on the
  transmitter, you can choose from the following profiles:
  • Hearing Profile 1: Low frequency tones are slightly
    boosted to provide a warm sound. High frequency sounds are reduced to
    make them less piercing.
  • Hearing Profile 2: High frequencies are strongly
    boosted to give you a crystal-clear sound.
  • Hearing Profile 3: Low frequencies are lowered to
    prevent them from overpowering the high frequencies.
• Speech Intelligibility Function: The Speech
  Intelligibility function automatically detects and reduces unwanted
  background noise to make speech easier to understand. The Speech
  Intelligibility button is located on the headset. A status LED on the
  transmitter will glow blue when the function is activated. Speech
  Intelligibility can be used in combination of any of the three Hearing
  Profiles.
• Balance: You can adjust the left/right balance of the
  headset using the L and R buttons on the transmitter.

Pairing Multiple Receivers: Up to four RR 5200 "stethoset"
receivers can be simultaneously paired to the transmitter. When more than one
receiver is paired, you can not adjust the balance, nor will the remaining
charge status and hearing profile be displayed on the transmitter.

Specifications:

RS 5200 System:

• Carrier Frequency: 2.4 to 2.4835 GHz
• Modulation: 8-FSK Digital
• Signal-to-Noise Ratio:
  • Analog Input: typ. 85 dBA at 1 Vrms
  • Digital Input: > 90 dBA
• RF Output: Max 10 dBm
• Audio Latency: < 60 ms
• Transmission Range: Up to 230 feet (70 meters) (line of sight)

RR 5200 Stethoset Receiver:

• Frequency Response: 15 Hz to 16 kHz
• Max SPL: 125 dB at 1 kHz, 3% THD
• THD: < 0.5% at 1 kHz, 100 dB SPL
• Battery: Operating Time: up to 12 hours; Charging Time:
  up to 3 hours
• Dimensions: Width 4.192" Height 0.818" Length 10.5"
• Weight: 2.2 ounces

TR 5200 Transmitter:

• Connections:
  • Digital Input: Optical
    (Toslink)
    • Supported Data Stream: PCM 32kHz to 96kHz / 16
      to 24-bit
  • Analog Input: 3.5mm stereo
    • Input Voltage Range: 0.15V to 4.0V
• Power Input: 5VDC / 1A
• Dimensions: Width 1.964" Height 1.654" Depth 10.611"
• Weight: 8.25 ounces