Audio Section
Video Section
Network & Tuner Functions
AirPlay/Bluetooth/USB Integration
Multiroom Audio/Video Playback
Remote, App, & Voice Control
Convenience Features

Audio Section

High Performance Discrete Amplification: The Denon AVR-X3800H AV receiver features a powerful Class AB power
amplifier section equipped with discrete high current power transistors. This discrete amplifier design delivers
optimum realism and stunning dynamic range. By using high current, high power discrete power devices, the amplifier is
able to easily drive high quality speakers. The AV receiver\’s nine channel Class AB amplifier is rated at 105 watts
(into 8-ohm, @ 20-20kHz, with 0.08% THD, driving 2 channels).

Amplifier Assignment: The AVR-X3800H\’s nine discrete amplifier channels can be configured to
accommodate your type of home theater setup. Its powerful DSP is even capable of up to 11.4 channel processing, allowing you to extend the system with an additional power amplifier.

• 11ch: Provides 11ch playback by assigning all nine internal amplifiers to the receiver\’s main zone and using an external 2ch amplifier for either the Front or Height 2 channels. Up to nine speakers can be powered by the receiver\’s amplifier, while two speakers are powered by an external amplifier. This amplifier configuration is compatible with up to 11.4ch and 7.4.4ch applications.
• 9ch: Assigns all nine amplifiers within the receiver for the Main Zone to power the Front, Center, Surround, Surround Back, and Height speakers. You can connect up to eleven speakers to the receiver\’s amplifier and the receiver will automatically allocate the nine amplifier channels to power up to nine speakers at a time. This amplifier configuration will automatically switch between 9.2ch and 7.4.2ch / 5.4.4 applications.
• 7ch Bi-Amp: Assigns all nine amplifiers of the receiver to the Main Zone with the front speakers bi-amped. Up to nine total speakers can be connected at one time – including Front, Center, Surround, Surround Back and Height speakers. The receiver will automatically switch for playback between 7.4ch and 5.4.2ch applications. The receiver\’s Height 2 amplifier channels are assigned to bi-amp the front speakers. A bi-amplification connection uses two amplifiers for one speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined midrange and tweeter section. With this arrangement each amplifier operates over a limited frequency range, making its job easier.
• 7ch + Zone 2: The nine amplifier channels of the receiver are assigned to power a 7ch speaker system in the Main Zone and stereo speakers in either Zone 2. Up to nine total speakers can be connected in the Main Zone – including Front, Center, Surround, Surround Back and Height speakers. The receiver will automatically switch for playback between 7.4ch and 5.4.2ch applications. The receiver\’s Height 2 amplifier channels are assigned to power Zone 2.
• 7ch + Front B: Assigns seven amplifier channels of the receiver to the Main Zone for up to 7ch playback and two amplifier channels to power another pair of front speakers in the Main Zone for stereo playback only. This is useful when you want to have a dedicated pair of 2ch speakers, in addition to your home theater speakers. If you choose to play the Front A and Front B speakers at the same time, Front B will play the same exact audio source and audio signal as Front A without down-mixing. Up to eleven total speakers can be connected in the Main Zone – including Front, Center, Surround, Surround Back, Height, and Front B speakers. The receiver can automatically switch for playback between 7.4ch and 5.4.2ch application. The receiver\’s Height 2 amplifier channels are assigned to power the Front B speakers.
• 5ch Bi-Amp + Zone 2: Assigns seven amplifiers of the receiver to the Main Zone with the front speakers bi-amped and two amplifier channels assigned to Zone 2 to power a pair of speakers in another room. The 5ch speaker system will consists of Front, Center, and Surround. The receiver\’s Height channels are reassigned to bi-amp the front speakers and power Zone 2. Surround Back speaker channels are not available in this mode. This amplifier configuration is not compatible with Dolby Atmos.

32-Bit/192kHz DACs: For optimum fidelity and the widest dynamic range with lowest distortion, the AVR-X3800H features advanced TI (Texas Instruments) 32-bit/192kHz digital-to-analog converters (DACs) on all channels. This ensures consistent high fidelity and precise channel matching across all channels for the ultimate listening experience.

Powerful DSP: The Denon AVR-X3800H features two sets of powerful DSP (Digital Sound Processor) chips for the latest surround sound decoding and processing, including Dolby Atmos and DTS:X. The AV receiver supports the following stereo & multichannel
digital audio formats through its HDMI jacks and optical/coax digital inputs.

Immersive Surround Sound: The Denon AVR-X3800H AV receiver goes beyond regular surround with the
latest immersive surround sound formats from Dolby Atmos, DTS:X, and AURO-3D. The AVR-X3800H offers 9-channels of amplification with support for up to 11.4 channel processing, allowing you to configure a 5.4.2, 5.4.4, 7.4.2, 7.4.4*, or 9.4.2* channel speaker system. A 7.4.4* and 9.4.2* channel speaker system will require an external 2ch amplifier (sold separately).

• Dolby Atmos: Dolby Atmos surround sound technology dispenses with
  channel-based coding in favor of more advanced object-based coding, giving the soundtrack designer the ability to
  precisely place sounds anywhere in the 3-dimensional space. Now you can enjoy this same award-winning technology at
  home with the AVR-X3800H that lets you configure a Dolby Atmos speaker system for the ultimate home theater experience.
  • Dolby Surround: Dolby Surround offers an enhanced cinema
    experience to your 2ch or multichannel movie soundtracks using your existing 5.1ch, 7.1ch, or Dolby Atmos speaker
    setup. Dolby Surround enhances audio definition by improving the spatial dimension and overall audio definition of
    movie soundtracks. It does this by using four distinct surround zones that provide greater control over the exact
    placement of each detail in a movie sound track, so audio can be matched more accurately to the video on screen; this
    means more depth and greater realism for your movies. As a result, individual sounds are clearer and more distinct.
    It also improves the surround sound experience across the entire theater by widening the listening \”sweet spot\”.
  • Dolby Atmos Height Virtualization: Dolby Atmos Height Virtualization provides immersive audio without height-channel or overhead speakers, creating virtual height effects in a 5.1ch, 7.1ch or 2.1ch speaker arrangement. Dolby Atmos Height Virtualization applies carefully designed \”height-cue\” filters to the overhead audio components of your content\’s soundtrack before they are mixed into your loudspeakers to create the sensation of sound above you.
• DTS:X: The latest immersive surround sound system, DTS:X features object-based audio coding that lets the
  soundtrack designer place sonic elements anywhere in the 3D acoustic soundspace, and provides for overhead speakers
  to deliver a stunning surround sound experience. Along with DTS:X decoding, the AVR-X3800H features DTS-HD Master
  Audio decoding and other DTS audio technologies.
  • DTS Neural:X: DTS Neural:X is an advanced spatial remapping technology from DTS, which provides a
    fully immersive output for all types of source content; this includes DTS bitstreams and non-encoded (PCM) data. DTS
    Neural:X delivers a thrilling sense of immersive sound to your speaker layout regardless of the original source
    format.
  • DTS Virtual:X: DTS Virtual:X bridges the gap
    between DTS:X and the reality of so many consumers\’ homes, allowing you to enjoy multi-dimensional sound regardless
    of room size, layout, or speaker configuration. DTS Virtual:X can be used with any content (from 2ch to 7.1.4ch
    soundtracks), while delivering virtual height & virtual surround processing based on psychoacoustics (not reflective
    surfaces).
• AURO-3D: This receiver is equipped with an Auro-3D decoder. With Auro-3D, Front Height, Surround Height and Top Surround are added to a conventional 5.1-channel system to achieve a natural and realistic soundfield that is three-dimensional and fully immersive. You will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D. Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle, Top Rear, or any Dolby Atmos Enabled speakers. But it is possible to support both an Auro-3D and Dolby Atmos by adding Front Height and Rear Height speakers to a 5.1 configuration. For an optimum Auro-3D experience Surround Height speakers are strongly recommended.

IMAX Enhanced Technology: Get the most premium at-home
entertainment experience with IMAX Enhanced; the latest
technology program from IMAX that sets a new standard for image, sound, scale and content quality. This new
certification and licensing program combines IMAX digitally re-mastered 4K HDR content and DTS audio technologies to
offer a new level of quality in immersive sight and sound experiences in the home. IMAX Enhanced lets you experience
premium content digitally remastered by IMAX, so you can watch the highest-quality 4K movies with immersive audio
delivered by DTS. Not only will IMAX Enhanced content look and sound amazing, but other audio/video content will also
look and sound great too.

• Remastered 4K/HDR Video: It utilizes a sophisticated, advanced algorithm designed to produce the
  highest-quality, sharpest 4K HDR images. This advanced process accurately reduces noise and grain under the
  filmmaker\’s guidance to best optimize the content for a much higher quality, higher brightness 4K HDR display format.
  Select IMAX Enhanced titles that were shot with IMAX cameras or specially formatted for IMAX theatres will also
  include an expanded aspect ratio for the film\’s home release to show your more picture on your TV. IMAX Enhanced
  certified TVs must be at least 65\” with support for HDR10 and dynamic, as well as specific calibration, resolution,
  color, brightness, contrast, and scale of image capabilities.
• Remastered DTS:X Audio: IMAX and DTS will also partner with award-winning Hollywood sound mixers
  to use a special variant of its DTS:X codec technology integrated in home audio equipment to deliver an IMAX signature
  sound experience that is dynamic, immersive, theatrical, and powerful. IMAX Enhanced supports both 5.1 and 11.1
  formats, but the recommended speaker layout for an IMAX Enhanced system is 7.2.4 with seven horizontal speakers, two
  subwoofers and four height speakers; 5.1.4 is the minimum layout for IMAX Enhanced. However, due to various
  constraints you may opt to install only a 5.1ch speaker system. In such cases, DTS Virtual:X is required to properly
  render and remap audio to the available speakers.
• Available IMAX Content: IMAX is working with its global studio and other content partners to
  build a steady stream of IMAX Enhanced versions of movies and other programming using the newest, proprietary
  post-production process developed by IMAX. IMAX will be announcing and releasing IMAX Enhanced versions of a wide
  range of films both for 4K/HDR streaming and Ultra HD Blu-ray Discs.

Audyssey Suite with Dual Presets: The AVR-X3800H features the Audyssey suite of powerful DSP features – including
MultEQ XT32, Sub EQ HT, LFC (Low Frequency Containment), Dynamic Volume, and Dynamic EQ. The newly adopted Dual Audyssey Preset function allows you to store and instantly switch between two Audyssey configurations. For example, you can store both the Audyssey calibration result straight from the receiver and a customized MultEQ curve or frequency range made through the Audyssey MultEQ editor app on the receiver simultaneously, allowing you to easily compare differences and select your preference. You can also perform Audyssey measurements for two different speaker settings, including 2.0 for music listening and 5.1.4 for movie surround.

• MultEQ XT32: Via the supplied measuring microphone, Audyssey MultEQ32 measures all the speakers
  in your home theater during setup, including the subwoofer, and then generates multiple high precision DSP room
  acoustic correction filters, which together provide smoothest and most natural tonal balance, regardless of the brand
  or model of the various speakers. Audyssey MultEQ32 incorporates more than ten thousand individual control points
  allowing finer details of the room\’s problems to be captured and corrected. Up to eight listening positions can be
  measured, configured, and recorded. MultEQ XT32 compensates for both time and frequency characteristics of the
  listening area based on \”Audyssey Setup\” measurement results. Selection is done from three types of compensation
  curves – Reference (default and recommended, L/R Bypass, Flat, and Off).
• Sub EQ HT: Audyssey Sub EQ HT provides individual DSP tailoring of each subwoofer in a dual
  subwoofer setup, for deeper bass with improved definition, compared to a single subwoofer configuration.
• LFC (Low Frequency Containment): Audyssey Low Frequency Containment uses advanced psychoacoustic
  algorithms to deliver a full range tonal balance, including deep bass, but without disturbing close-by neighbors or
  family members in other rooms, and features a multi-step adjustment that lets you dial in the amount of containment to
  your preference.
• Dynamic Volume: Audyssey Dynamic Volume features advanced psycho-acoustic processing to deliver
  clear dialog and wide range sound at reduced volume levels so that you can enjoy theater-level clarity at whatever
  listening level you choose.
• Dynamic EQ: Audyssey Dynamic EQ also features advanced DSP processing to deliver full range
  wide-band response, even at reduced volume levels. Dynamic EQ Reference Level Offset provides three offsets from the
  film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the
  standard.

Listening Modes: The Denon AVR-X3800H features a variety of Listening modes to choose from, so you
can enjoy your movie or music soundtrack the way you want to hear it.

• Auto Detection: In Auto Mode, the Listening Mode switches automatically to the corresponding type
  of audio input signal (Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-HD, or multichannel PCM) that is
  detected. If the input signal is analog or PCM (2-channel), stereo playback is used.
• Denon Original Sound: Denon\’s Original Listening Modes, combined with Dolby Digital/DTS
  processing, produce more realistic, powerful sound effects for your movie and music sound tracks based on the type of
  content and your home theater setup. Choose between Rock Arena, Jazz Club, Matrix, Video Game, Mono Movie,
  Multichannel Stereo, or Virtual (surround from only front speakers or headphones).
• Stereo Playback: Sound is output from the front left and right speakers, as well as the powered
  subwoofer. If multichannel signals are input, they are mixed down to 2-channel audio. The tone settings can be
  adjusted.
• Direct Modes: The Denon AVR-X3800H offers two Direct Listening Modes which bypass the receiver\’s
  tone & DSP processing for higher sound quality performance. Direct Mode provides playback of 2ch or Multichannel audio
  in its original form, without any surround or tone processing. Pure Direct Mode goes a step further by turning off the
  receiver\’s display and analog video circuitry to minimize the possibility of any noise being added to the audio
  signal.

Audio Enhancements: The Denon AVR-X3800H receiver provides various audio enhancements to deliver a
high-quality listening experience every time.

• CINEMA EQ (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme
  high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the
  sound from the front speakers is too bright. This function only works in the Dolby Digital & DTS modes.
• Compressed Audio Restorer: Compressed audio formats such as MP3, WMA (Windows Media Audio), and
  MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The
  Restorer function generates the signals eliminated upon compression, restoring the sound to conditions near those of
  the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with
  compressed audio signals.
• Dynamic Range Compression (DRC): Motion picture soundtracks have tremendous dynamic range (the
  contrast between very soft and very loud sounds). For listening late at night, or whenever the maximum sound level is
  lower than usual, Compressing the dynamic range allows you to hear all of the sounds in the soundtrack with reduced
  dynamic range. DRC works when playing program sources recorded in Dolby Digital or DTS.
• Room Size: The receiver\’s audio output can be set to simulate the acoustics of a Small, Medium
  Small, Medium (default), Medium Large, or Large room environment. This setting is not an indication of the actual size
  of your listening area.
• Center Spread & Dialog Control: Center Spread expands the center channel signal to left and right
  front speakers to create a wider frontal audio image for the listener, when in Dolby Surround mode. Dialog Control
  adjusts the volume of dialog in movies and vocals in music so they can be heard more easily, when in DTS:X mode.
• LFE + Main: The LFE + Main setting boosts the bass sound by feeding the low-frequency signal to
  both the loudspeakers and the powered subwoofer, regardless of audio format or listening mode.

Volume & Level Settings: The AVR-X3800H offers the following volume & level settings.

• Volume Settings: You can choose to display an Absolute volume scale (0-98) or Relative volume
  scale (-79.5 to 18dB). You can also set a maximum volume level of 0 (80), -10 (70), or -20 (60) dB to limit the
  receiver\’s total volume output. In addition, you can define the volume setting that is active when the power is turned
  on; select \”Mute\”, -79 to +18dB (1-98), or Last. These settings can be set independently for the Main Zone and Zone 2.
• Mute Level: You can set the amount of attenuation for the audio muting circuit; -40dB or -20dB
  below current volume, or full mute (sound turned off entirely). The Mute Level can be set independently for the Main
  Zone and Zone 2.
• Channel, Center, & Subwoofer Level: The volume level (-12 to +12dB) of each channel can be
  changed while listening to audio for each input source. You can also adjust the center channel volume level (-12 to
  +12dB) independently from the channel level to clarify the dialog for all sources. In addition, you can adjust the
  subwoofer channel volume level (-12 to +12dB) independently from the channel level to emphasize low frequencies for
  all input sources.
• Source Level: This function adjusts the playback level of the currently selected input source\’s
  audio input. Use this feature if there are differences in the input volume levels between different sources. You can
  correct the playback level of the audio input from -12 to +12dB.

eARC (Enhanced Audio Return Channel): This feature of the AV receiver\’s main HDMI monitor output allows audio to be sent from your compatible TV to the receiver through the same HDMI cable already being used to send audio and video to your TV. This eliminates the need for extra cables connected to your television. eARC (Enhanced Audio Return Channel) will support uncompressed audio formats like Dolby TrueHD, Dolby Atmos, DTS:X, & DTS HD Master Audio – where as the previous ARC (Audio Return Channel) was limited to only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Pre-Amplifier Mode with 7.4.4ch Pre-Outs: With the new Pre-Amplifier Mode, the Denon AVR-X3800H can work as an AV pre-processor with the latest HDMI connectivity to upgrade and modernize your AV separate system. Pre-Amplifier Mode provides a cleaner signal path and more tolerance in clipping level by disconnecting the AV receiver\’s internal amplifiers, when the receiver is used as an AV processor and all speakers are powered by external amplifiers. The AVR-X3800H receiver features 7.4.4ch variable pre-amp outputs (Front L/R, Center, Surround L/R, Surround Back L/R, Height 1 L/R, Height 2 L/R, and Quad Subs) for connection to external power amplifiers. Each subwoofer output is discrete.

Color-Coded Speaker Terminals: The receiver has binding-post terminals for all speaker connections. The binding-post terminals can accept bare wire, pin connectors, and banana plugs (single/dual). The receiver will accept speaker impedances of 4 to 16-ohm. The AV receiver comes with color-coded labels to easily identify which channel a speaker cable should be connected to. Since the speaker cables have labels in the same colors as the connectors on the AVR-X3800H\’s rear panel, there\’s no longer any confusion about which terminals they should be connected to.

Headphone Jack: When headphones are plugged into the full-size 1/4\” jack on the front panel, all the speaker outputs and pre-outs are automatically muted.

Phono Input: The Denon AVR-X3800H is outfitted with a Phono input (MM), so you can connect your
turntable and listen to your vinyl records with high-quality sound.

Video Section

HDMI 2.1: Featuring six HDMI inputs and three HDMI outputs, the AVR-X3800H
incorporates an advanced video section that features some of the latest HDMI 2.1 specifications; including support for 8K/60Hz and 4K/120 Hz video pass-through (up to 40Gbps), HDCP 2.3 compatibility, BT.2020 Wide Color Gamut, and 4:4:4 Pure Color sub-sampling. Use a premium High Speed 18Gbps HDMI cable for the best 4K/HDR performance.
Use an Ultra High Speed 48Gbps HDMI cable to enjoy 8K video.

• 4K/120 Hz + 8K/60Hz Pass-Through: All of the AVR-X3800H\’s HDMI inputs, as well as the Main and Monitor 2 HDMI outputs support up to 8K (7680 x 4320) video @ 60 frames per second, as well as 4K video @ 120 frames per second (both up to 40Gbps). The Zone 2 HDMI output is limited to 4K (3840×2160
  pixels) video @ 60 frames per second. In addition, the the HDMI inputs and outputs will pass a 1080p/i, 720p, and 480p/i video signal.
• HDCP 2.3 Compliant: All of the AV receiver\’s HDMI inputs and outputs support HDCP 2.3,
  which fully complies with the latest copyright protection standard for 4K/HDR video transmission.
• 4:4:4 Color Subsampling: The HDMI inputs and monitor outputs support RGB, YCbCr 4:4:4, YCbCr
  4:2:2, and YCbCr 4:2:0 color subsampling (pixel depth and frame rate will vary). With 4:4:4 color subsampling, luminance (brightness) and
  chroma (color) are sampled at the same rate; resulting in an RGB color palette as big as the video sampling rate for a
  video image with more colors, plus greater color accuracy and detail.
• Wide Color Gamut (BT.2020): The BT.2020 color standard delivers a much wider color gamut and
  represents about 75% of the total visual color spectrum, while the current Rec. 709 color standard selected as the
  color space for HDTVs and early generation 4K Ultra HDTVs covers only 35% of the total visual color spectrum.

Dynamic HDR: HDR provides enhanced picture quality by simultaneously enabling
greater detail for both the dark and bright parts of an image. HDR reproduces a greater dynamic range of luminosity or
brightness levels, creating greater contrast. This increased contrast reveals the subtle nuances of the image, from
detailed blacks and shadows to the brightest whites and colors, plus greater depth. Dynamic HDR enables a noticeable progression in overall video image quality from SDR to static HDR, and now static HDR to dynamic HDR. Dynamic HDR support ensures every moment of a video is displayed at its ideal values for depth, detail, brightness, contrast, and wider color gamuts on a scene-by-scene or even a frame-by-frame basis. Dynamic HDR enhanced content is available for movies, videos, TV shows, video and PC games and VR.

• HDR10: HDR10 is an open standard and currently the most popular HDR format on the market. It
  uses static metadata at the start of a movie to tell the receiver and your TV that the video content is encoded using
  HDR.
• HDR10+: HDR10+ is a new open standard that leverages dynamic metadata to produce enhanced contrast and colors on an expanded range of televisions. HDR10+ incorporates dynamic metadata that allows the adjustment of brightness levels on a scene-by-scene or even frame-by-frame basis. By applying individualized tone mapping to each scene, HDR10+ delivers an incredible viewing experience. The picture quality offers an enhanced visual experience with more detailed expressions, brighter shadow areas and more accurate color renderings that stay true to the creator\’s original intent.
• Hybrid-Log Gamma: HLG (Hybrid-Log Gamma) is primarily designed for live video feed and
  over-the-air broadcasts. It uses no pre-encoded metadata and is backwards compatible with SDR. HLG\’s native
  compatibility allows much of today\’s existing SDR infrastructure to be re-used for HDR in the future.
• Dolby Vision: Unlike HDR 10 which contains static metadata and HLG which uses no metadata, Dolby
  Vision uses dynamic metadata technology which sets individual color and brightness levels for each and every scene.
  Dolby works directly with filmmakers at major Hollywood studios to create superior HDR video masters of blockbuster
  movies.

4K/8K HDMI Video Upscaling: The Denon AV receiver offers HDMI video upscaling (up to 4K or 8K Ultra HD) thanks to its NatureVue video processor by Analog Devices. This sophisticated video processor provides upscaling of 1080p high definition HDMI connected sources to 4K or 8K Ultra HD; as well as 4K Video sources to 8K picture quality. The AV receiver only upscales HDMI input sources through the receiver\’s main HDMI output (not the Monitor 2 or Zone 2 HDMI outputs).

Three HDMI Outputs: The Main and Monitor 2 parallel HDMI outputs distribute the same HDMI input signal (up to 8K)
simultaneously to two separate displays, while the discrete Zone HDMI output allows you to play a different HDMI audio/video
source (up to 4K) in another zone (Zone 2).

Optimized Gaming: Showcased in the AVR-X3800H are new HDMI features like Variable Refresh Rate (VRR), Quick Frame Transport (QFT), and Auto Low Latency Mode (ALLM) – which reduce or eliminate lag and frame tearing to offer a smoother, lag-free gaming experience.

• Variable Refresh Rate (VRR): Support for Variable Refresh Rate (VRR) allows the TV to adapt to certain Game console\’s frame rate. This helps to reduce or eliminate lag, stutter and frame tearing for more fluid and better detailed gameplay.
• Auto Low Latency Mode (ALLM): The receiver will enter ALLM (Auto Low Latency Mode) when it detects a gaming signal from a compatible device (such as a Xbox One) and allows for a smooth, lag-free gaming experience. During ALLM, the receiver disables the i/p scaler and Auto Lip Sync function.
• Quick Frame Transport (QFT): Quick Frame Transport (QFT) transmits each frame at a higher rate to decrease "display latency", which is the amount of time between a frame being ready for transmission in the GPU and that frame being completely displayed.
  Enjoy reduced latency for smoother, tear-free entertainment experience.

HDMI Standby Pass-Through: When the AV receiver is in \”Standby\” mode and the HDMI Standby
Pass-Through function is enabled, both audio/video streams from the receivers HDMI input will be output to your
television, via the AV receiver\’s HDMI monitor output. Once the receiver is turned \”On\”, only video will pass through
the monitor output to your TV and the audio is directed to the receiver\’s speaker outputs.

• HDMI Input: Selects the HDMI Input for which the HDMI Standby Pass-Through function is
  enabled.
• Last: The HDMI Standby-Through function is activated on the input source selected at the time of
  setting the AV receiver to the \”Standby\” mode.
• Off: The HDMI Standby Pass-Through function is disabled.

Other HDMI Features: The Denon AVR-X3800H AV receiver\’s HDMI connectivity also offers 3D video pass-through and auto LipSync function.

• 3D Ready: The AVR-X3800H AV receiver supports 3D video pass-through (720p/1080p only) from connected 3D-compatible Blu-ray, games and broadcast devices to 3D-compatible HDTVs (all 3D components must be connected via HDMI). Special eyewear will be required for viewing 3D content.
• LipSync: This function adjusts the delay between audio and video output. You can do this manually or have the receiver set the LipSync function automatically. When connected to a TV via HDMI the receiver automatically adjusts audio output timing, if the TV supports an automatic LipSync function. You can also manually delay the sound output up to 500ms to synchronize it with the video image.

Advanced ISFccc Video Calibration: The AVR-X3800H is certified by the Imaging Science Foundation to
deliver top video quality, and the unit also features advanced ISFccc video calibration controls that allow for
precision fine-tuning of the connected HDTV, even if it\’s not an ISF certified set. You can choose from a variety of
Picture Modes – Standard, Movie, Vivid, Streaming, ISF Day, ISF Night, Custom, or Off. The Custom mode lets you
manually adjust Contrast, Brightness, Saturation, Noise Reduction, and Enhancer (sharpness).

Video Select Function: This receiver can display video from a different source on your connected TV during audio playback from CD, Tuner, HEOS, or Phono.

Network & Tuner Functions

Wired or Wireless Network Connection: The Denon AVR-X3800H offers a wired or wireless network
connection. Either network connection gives the receiver access to HEOS music apps (like Pandora, Amazon, or Tidal),
TuneIn Internet Radio, Spotify Connect, your music library on your Apple iOS or Android device, as well as music
content on your Windows PC or DLNA music server.

• Ethernet Jack: The Denon AVR-X3800H receiver is fitted with a RJ-45 Ethernet (LAN) port to make a
  wired connection from the receiver to your home network.
• Built-in WiFi: The receiver also offers built-in WiFi (IEEE 802.11ac; 2.4/5GHz) for a
  wireless network connection; WPS, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES) security protection is supported.
  Wireless network setup can be done via WPS button, Access Point Scan, Manual Setting, PIN Code, or even through your
  Apple iOS device (7.0+).

TuneIn Internet Radio: The Denon AVR-X3800H includes access to more than 100,000 free internet
radio streams from all corners of the globe via the built-in TuneIn online music service. Simply select TuneIn from the receiver\’s on-screen menu using the included remote and browse
among the 100,000 stations neatly organized into popular categories and select a station that appeals to you.

Spotify Connect: If you subscribe to Spotify and have the Spotify App on your Apple iOS or Android mobile device, you can stream
Spotify to the Denon AV receiver. Spotify is a digital music service that gives you on-demand access to one of the
largest music libraries in the world. Spotify makes it easier than ever to
discover, manage, and share music with your friends. You can browse music by artist, album, track, or most popular; and
create your own music library with customized playlists.

HEOS Music Apps: With built-in HEOS technology and the HEOS app (for Apple iOS 12.0+ and Android OS 5.0+) on your compatible Apple iOS or
Android mobile device, you\’ll be able to stream a wide variety of online music services (fees may apply), plus the
music library of your mobile device through the Denon AV receiver.

• Online Music Services: Using the HEOS app, you\’ll be able to stream your favorite online music
  services like Amazon Music
  (including HD), Pandora, TIDAL, iHeart Radio, SiriusXM, TuneIn, & Spotify (some
  services will require a paid subscription, purchases, and/or other fees). The HEOS app on your Apple iOS or
  Android device will serve as the controller for these apps and provide song/artist information with Album Art. You
  can create a \”Favorite\” station list, so you can quickly access your favorite internet radio stations and online
  music channels.
• Mobile Device Streaming: Using the HEOS app on your Apple iOS or Android mobile device, you are
  able to stream your device\’s music library to the Denon AV receiver. You\’ll be able to browse your music library by
  Artist, Album, Genre, and Song; control music playback functions like Play/Pause and Previous/Next Track; and view
  song/artist info with Album Art from the app on your compatible mobile device. You can even type in an artist name or
  song title to find music in your mobile device\’s library.